Key Features
Output power capacity
1.05kWatts / 1.5kVA
Output Connections
(4) Schuko CEE 7 (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
IEC 60320 C14
- Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Cold-start capableProvides temporary battery power when the utility power is out.
- LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Easy UPS Features & Benefits
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Features
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Cold-start capable
Provides temporary battery power when the utility power is out.
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Protection
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
Technical Specifications
Output
- Max Configurable Power (Watts): 1.05kWatts / 1.5kVA
- Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Unsynchronised
- Load Crest Factor: 3 : 1
- Topology: Line interactive
- Waveform type: Sine wave
- Transfer Time: 2-6 ms typical : 12 ms maximum
Input
- Input frequency: 45 – 65 Hz Auto-sensing
- Input voltage range for main operations: 165 – 290V
- Number of Power Cords: 1
- Other Input Voltages: 220 V, 240 V
Batteries & Runtime
- Battery type: Lead-acid battery
- Typical recharge time: 4hour(s)
- Nominal Battery Voltage: 24 V
- Expected Battery Life (years): 3 – 5
- Battery Charge Power (Watts): 54 Watts
- Battery Volt-Amp-Hour Capacity: 240
Communications & Management
- Interface Port(s): USB
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating: 190Joules
Physical
- Maximum Height: 22.0CM
- Maximum Width: 16.0CM
- Maximum Depth: 41.0CM
- Net Weight: 17.8KG
- Color: Black
Environmental
- Operating Temperature: 0 – 40 °C
- Operating Relative Humidity: 0 – 95 (Non-condensing) %
- Operating Elevation: 0 – 3000meters
- Storage Temperature: -10 – 40 °C
- Storage Relative Humidity: 0 – 95 (Non-condensing) %
- Storage Elevation: 0 – 15000meters
- Audible noise at 1 meter from surface of unit: 45.0dBA
- Protection Class: IP20
